Spectra-precision Survey Pro v3.80 Recon GPS User Manual Bedienungsanleitung PDF herunterladen (Seite 93)

Trouble Shooting

You set up the rover and the Rx. Light on the rover radio is not

blinking.

Make sure the radio serial cable is connected.

Make sure the radio antenna is connected.

Make sure the rover radio COM port and baud rate is

correct.

Make sure the base and rover radios are on the same

channel.

You set up the rover and the Rx. light is blinking sporadically.

The radio is receiving interfering signals on this channel.

Switch the base and rover radios to a different channel.

You set up the rover and the Rx. light is blinking but the Data

Link card on the GPS Status screen says

No Data from Radio

Make sure the radio serial cable is connected.

Make sure the rover radio COM port and baud rate is

correct.

Projection Solutions

You set up a mapping plane requiring data files for datum

conversion or you are using geoid modeling and you get a message

about files not found.

Make sure the required data files are in the directory

specified on the

Path to Data Files

field on the Projection

card of the Job

, Settings screen.

You select a custom projection file and you get a message about

file format not valid.

The .CS5 or .PJ5 custom projection file has been

corrupted. Open the file in the text editor and repair it or

generate a new file using Survey Link.

You solve localization and the horizontal or vertical residuals are

larger than the measurement precision of the instrument, or

1 2 ... 88 89 90 91 92 93 94 95

Keine Kommentare

Spectra-precision Survey Pro v3.80 Recon GPS User Manual Bedienungsanleitung Seite 93