Spectra-precision ADLCONF User Guide Bedienungsanleitung PDF herunterladen (Seite 19)

ADLCONF User Guide

retransmit each data packet it receives. Checking this option displays different fields

depending on the selected protocol. If you selected a non-Trimble protocol and then

check the Repeater check box, the Repeater Delay field appears.

Enter the amount of time you want to elapse between receipt of a data packet and its

retransmission. You may enter any value between 0 and 255.

If you selected the TRIMTALK 450S, TRIMMARK II/IIe, TT450S (HW), or TRIMMARK 3

protocol and then select the Repeater check box, the following repeater modes become

available:

• Select the BASE with One Repeater option to configure the attached radio as a base

station transmitting RTK corrections to one repeater radio

• Select the BASE with Two Repeaters option to configure the attached radio as a base

station transmitting RTK corrections to two repeater radios

• Select the Repeater One option to configure the attached radio as a single repeater

or the first of two repeaters

• Select the Repeater Two option to configure the attached radio as the second of two

repeaters

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Keine Kommentare

Spectra-precision ADLCONF User Guide Bedienungsanleitung Seite 19