Spectra-precision FAST Survey Bedienungsanleitung PDF herunterladen (Seite 18)

English

Configuration

Steps

In FAST Survey, tap on the Equip tab and then on the GPS Base

button. A message may appear asking you to confirm your

choice of configuring a base. Tap Yes. This opens the Current

tab of the GPS Base window. You will have to go through four

different configuration tabs (only three for ProMark 220)

before the base is configured and made operational.

Legend used in all the tables below:

“•” (blue background): The parameter exists for the considered GNSS receiver

and needs to be set to some value.

<Blank>: The parameter does NOT exist for the considered receiver.

“NA” (Non Applicable): The parameter exists but is irrelevant to the

considered receiver.

<Any_Other_Text> (orange background): The parameter exists for the

considered receiver and the text tells you the value you should assign to the

parameter.

Current Tab

Use this tab to identify the GNSS receiver FAST Survey has

to configure as a base.

The button allows you to read the following information

from the receiver:

– Firmware version

– Receiver ID

– Power status

– Free memory space

– Firmware options installed.

FAST Survey will connect to the receiver via the currently set

connection to get this information.

Tap on to return to the Current tab.

Parameters EPOCH 50 ProMark 220 ProMark 800 ProFlex 800

Manufacturer, should

be set to:

“Spectra Precision”

Model, should be set

to:

“Epoch 50”

“ProMark

100/120/200/

220”

“ProMark

800”

“ProFlex

800”

• • • •

Load/Save/Rename/

Delete Configuration

File

• • • •

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Spectra-precision FAST Survey Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Spectra-precision FAST Survey