Spectra-precision FAST Survey Bedienungsanleitung PDF herunterladen (Seite 17)

English

Configuring a Base

The following Spectra Precision GNSS receivers may be used

as a base: ProMark 800, EPOCH 50, ProFlex 800 or

ProMark 220.

Prerequisites For ProMark 220:

• If you are using the internal GSM modem, insert the SIM

card making possible the use of the modem.

• If you are using an external radio, connect that radio to the

receiver using a POGO cable (see Using an External Radio

with a ProMark 220 on page 53).

• Connect the external antenna to the receiver

• Power on the receiver, run FAST Survey and open a job

file.

• Set the tracking mode using GNSS Toolbox. FAST Survey

will only be able to work from the signals selected with this

utility.

–

suming ProMark 220 is the currently selected type

of GNSS receiver in FAST Survey (Current tab),

running GNSS Toolbox from within FAST Survey is

simply done by selecting Equip > GPS Utilities > GNSS

Toolbox > GNSS Settings.

– Select the desired option from the Tracking mode drop-

down list. You can also set the elevation mask, enable

or disable the use of SBAS and QZSS and preset the

model of external antenna used.

– Then tap OK twice to return to the Equip menu.

For all other receivers:

• If you are using a GSM modem (whether internal or

external), insert the SIM card making possible the use of

the modem.

• If you are using an external radio transmitter, connect that

radio to the receiver and turn it on.

• Connect the external GNSS antenna (ProFlex 800).

• Power on the GNSS receiver and data collector.

• Run FAST Survey and open a job file.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Keine Kommentare

Spectra-precision FAST Survey Bedienungsanleitung Seite 17