Spectra-precision FAST Survey Bedienungsanleitung PDF herunterladen (Seite 31)

English

Comms Tab

Use this tab to set the connection between the data collector

running FAST Survey and the GNSS receiver you intend to

configure as a rover.

ProMark 220 being both a GNSS receiver and a data

collector, the connection between these two parts is managed

internally and automatically. That’s why the Comms tab does

not exist for this receiver.

For all other Spectra Precision receivers, you can choose

between a Bluetooth or cable connection, as explained below.

Bluetooth Connection:

• Select “Bluetooth” in the Type field. The Device field is

automatically set to “Windows Mobile”, which is the

option that should be used in all cases.

• Tap to access the Bluetooth driver.

• Tap Find Receiver to search for and list all the Bluetooth

devices located nearby. When it’s done, you should

recognize your GNSS receiver in the list.

• Select the receiver in the list and tap to activate the

Bluetooth connection with the receiver. This takes you

back to the Comms tab where the name of the connected

Bluetooth device now appears in the Instr field. More

information on Bluetooth is provided in How FAST Survey

Interfaces With a GNSS Receiver Via Bluetooth on page 7.

Cable Connection:

• Select “Cable” in the Type field.

• Configure the serial line (baud rate, parity, data bits, stop

bits).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Keine Kommentare

Spectra-precision FAST Survey Bedienungsanleitung Seite 31