Spectra-precision FAST Survey Bedienungsanleitung PDF herunterladen (Seite 57)

English

5. Use the Tag New Site button to tag the raw data file with

the name of the site (point or line) you are surveying:

• Site Name: Enter a four-character name (recommended)

so that the entire name, and not a truncated name, can

appear later in the raw data file name. Longer site

names will not be truncated however in GNSS

Solutions.

For a static observation (by a base or a rover), enter the

name of the site where data collection takes place.

For a Stop & Go observation, enter a new name each

time you arrive at a new point. This will later be

interpreted as the beginning of a static occupation on

this point. The end of the static occupation is

controlled by the Stop Logging parameter below.

For a continuous kinematic observation, enter the

name of the line you are surveying.

• Site Attr.: Enter an optional description for the surveyed

site.

[The antenna height and raw data recording rate

(interval) are recalled on this screen. You can still

change them if necessary.]

• Stop Logging: This parameter controls the end of the

static observation on the specified point name (not to

be confused with the end of raw data collection).

This control may be manual (you will decide by

yourself when to stop: select Manually), or automatic,

by selecting After and entering a preset duration, in

minutes, for the observation on the point.

Typical durations in static are a day’s work for a base

or several minutes or hours for a rover.

Typical durations in Stop & Go are several seconds to

several minutes on each point.

In continuous kinematic, it makes sense to choose

Manually because you do not know in advance how long

it will take to get to the end of the line.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 67 68

Keine Kommentare

Spectra-precision FAST Survey Bedienungsanleitung Seite 57